PHiliphh Goldway UT6000A Patient Monitor Battery FB1223 12V 2300mAh
ICU Patient Monitor Parts PHiliphh Goldway UT6000A Patient Monitor Battery FB1223 12V 2300mAh
► Brief Introduction
The battery for the PHiliphh Goldway UT6000A Patient Monitor is likely a rechargeable battery designed to power the monitor. The battery is an essential component, as it provides a portable and reliable power source for the monitor, allowing it to be used in various healthcare settings.
► Monitor power supply and battery test
(1) Connect power cable between the wall outlet and monitor power connector and power the monitor up.
(2) Inspect if the power indicator lights up and the indicator color.
Green: The monitor is powered on and in normal working status.
Yellow: The monitor is connected to AC power but not turned on. It is under internal battery charging status.
(3) Press the power switch of the monitor to turn on the monitor and unplug the power cable.
Inspect if the power indicator is green and if a battery mark is in the status box on the screen showing that the monitor is powered by battery.
(4) Conduct ECG test according to the following instructions.
(5) Reconnect the monitor to AC power and start the tests.
► How To Use
Ensure Proper Battery Type: Make sure that you are using the correct type of battery specified for the UT6000A Patient Monitor. Refer to the user manual or check the label on the battery for details.
Charge the Battery: If the battery is rechargeable, charge it fully before initial use. Connect the battery to the appropriate charging unit or dock, and follow the charging instructions provided in the manual.
Insert the Battery: Locate the battery compartment on the patient monitor. Open the compartment according to the manufacturer's instructions. Insert the fully charged battery into the designated slot, ensuring the correct orientation.
Secure the Battery: Close and secure the battery compartment as per the instructions. Ensure that the battery is securely in place to prevent any interruptions in power during use.
Power On the Monitor: Turn on the patient monitor using the power button or controls specified in the user manual. The monitor should now operate using the power from the battery.
Monitor Battery Status: Most patient monitors provide information about the battery status on the display screen. Keep an eye on the battery indicator to know when it needs recharging or replacement.
Recharge or Replace: When the battery is low, recharge it using the appropriate charging method. If the battery is not rechargeable or has reached the end of its lifespan, replace it with a new, compatible battery.
► Specification
| Battery | 12V/4.0AH sealed lead-acid |
| Charge time | ≥8 hours |
| Operating time | ≥1.5 hours (full recharge) |
| Battery Charging Method | Automatic charging after monitor is connected to AC power supply (with charge protection function) |
| Discharge Protection | When powered by battery, the monitor will be automatically turned off when battery power is almost used up. |
Thank you for your time and interest in PHiliphh Goldway UT6000A Patient Monitor Battery FB1223 12V 2300mAh .
If you want to explore more details please let us know. Any inquiry will be highly appreciated and thanks for your support. Looking forward to receiving your early inquiry.
Product Tags:
|
|
ICU Patient Monitor Parts PHiliph Goldway UT6000A FB1223 12V 2300mA hBattery Images
|
