Stryker 6208 System 6 Sagittal Saw
--- Brief Introduction of Stryker 6208 System 6 Sagittal Saw
The Stryker 6208 Sagittal Saw is a high-precision surgical instrument designed for orthopedic and trauma surgery, specifically for cutting bone. It
features an ergonomic design and advanced oscillating motion that provides surgeons with exceptional control and precision.
--- Features of Stryker 6208 System 6 Sagittal Saw
• Battery Lock – Press the battery lock to remove the battery from the handpiece.
• Battery – Rechargeable battery that powers the handpiece.
• Position Button – Press the position button to adjust the sagittal head.
• Blade Lock Lever – Rotate the lever to the “Load” or “Run” position to load or lock the blade.
• Blade Holder – The blade holder holds the blade in place.
• Sagittal Head – The sagittal head can be positioned in 45° increments and rotated 360° to set the desired cutting angle.
• Trigger Switch – The trigger switch is pressure sensitive and allows variable speed control.
• Fast/Standard/Safety Mode Control – Allows the handpiece to operate in Fast or Standard mode depending on the position. Safety Mode prevents operation of the handpiece.
• Accessory Interface – The connection provides power and communication for future accessories.
--- Safety Precautions:
• Allow the blade to cut while using the handpiece. Excessive force can bend the blade and reduce cut quality.
• Do not stop the handpiece. This could damage the motor or battery. If the handpiece jams, release the trigger immediately. Remove any obstructions before continuing.
• If a power outage occurs while using the handpiece, be sure to replace the battery with a fully charged one. Otherwise, the battery may be discharged or damaged, shortening its life.
• Slide the fAST/STD/Safe control to the fAST or STD position to operate the handpiece.
• Pull the pressure-sensitive trigger to operate at variable speed.
• When finished using the handpiece, slide the fAST/STD/Safe control to the safe position.
--- Specification of Stryker 6208 System 6 Sagittal Saw
| Product Name | Stryker 6208 System 6 Sagittal Saw |
| Model | Ref 6208 Sagittal Saw |
| Size: | 8.5 in. [216 mm] height (with large battery pack) 1.5 in. [38 mm] width 6.4 in. [163 mm] length |
| Weight: | 3.5 lbs. [1.58 kg] (with large battery pack) |
| Speed: | 12,000 CPM (fAST mode); 10,000 CPM (STD mode) |
| Excursion: | 5° arc |
| Duty Cycle: | Intermittent Operation - 1 minute on / 4 minutes off 5 times with a 3 hour rest |
| Power Supply: | Internally Powered 9.6 V |
Thank you so much for your attention .If you're interested in Stryker 6208 System 6 Sagittal Saw For Hospital Repairing ,feel free to contact us .Thank you .
|
|
Stryker 6208 System 6 Sagittal Saw For Hospital Repairing Images
|
